|
|
Directory: Catalog > Water
Heaters > A. O. Smith > Gas-Fired Water Heaters
A.O. Smith Master-Fit® Boosters
- Produces power-induced draft of make-up air prior to burner ignition
- Provides more efficient control of heat through the flue collector
- No draft hood or barometric damper required
- Can be commonly vented with other Category 1 appliances, using standard metal type “B” vent
- 150,000 - 199,900 Input BTU/HR
- Recovery: 145 - 194 GPH @ 100°F Rise
- Recovery: 364 - 485 GPH @ 40°F Rise
- 32 Gallon Storage Capacity
- 3/4 in. Gas Connection
- 1-1/2 in. Water Connection
- Width: 27 3/4 in.
- Diameter: 27 3/4 in.
- Approximate Shipping Weight: 460 lb
- Height: 45 in.
- Master-Fit® Booster Spec Sheet (AOSCG10400)
- Master-Fit® Booster Manual (196308-001)
| Family |
Model |
Spec Sheet |
| Master-FitŪ Booster |
BTR-151
BTR-201 |
AOSCG10400 |
Lead times vary, depending on the unit. Please contact us for questions about product availabilty.
*IMPORTANT: By purchasing this boiler from JupiterHeating.com, the customer is agreeing that the unit will be installed by a licensed, professional heating contractor; that the customer and installer will follow all local zoning regulations, as well as all manufacturer's installation instructions, policies, and warranty requirements; and that the customer has read and understood JupiterHeating.com's Terms of Sale.
Shipping for unit is $200 to anywhere in the continental United States (multiple units are shipped at no additional charge).
The rate is based on residential delivery with a liftgate. This unit is
strapped onto a pallet and shipped via LTL to minimize risk of shipping damage.
Shipping savings may by possible for commercial delivery,
or for not needing a liftgate. Contact Us for a custom
shipping quote if any of those situations apply, or if you are located outside the continental United States.
|
