Directory: Catalog > Insulation > Astro-Foil Insulation

Astro-Foil (foil/bubble/bubble/foil) Reflective Insulation

ASTRO-FOIL reflective foil insulation consists of two layers of polyethylene bubble film sandwiched between two layers of 99.9% pure aluminum foil, making a structure 5/16-inch thick. Depending upon the application, ASTRO-FOIL can outperform 6" of mass insulation in all climates. Even higher performance can be expected in hot, humid climates.

ASTRO-FOIL is excellent as a primary insulation for buildings of all types. Preferred by installers and building owners because it is safe to handle, lightweight and works especially well in limited space. There are numerous applications for residential, commercial, industrial and agricultural buildings. Standard roll size: 48" x 125' & 72" x 125', other sizes available as shown below.

• It reflects heat - keeps buildings warm in Winter and cool in Summer.
• It stops air infiltration - seals drafty buildings.
• It acts as a vapor barrier.
• It is strong, light weight, clean and does not degrade over time.
• It is easy and fast to install - usually saves up to 50% labor time.
• It improves comfort AND saves money.
• General information about Astro-Foil Reflective Insulation

Note: Quantities can be modified after you "Add to Cart". The shopping cart will also give you a running total of the shipping charges.

Download Literature:
Loading times will vary depending on the speed of your Internet connection. After the download is complete, use your browser's back arrow to return to this page.

• Astro-Foil Suggested Applications (660 KB Adobe PDF)
• Astro-Foil Installation Buildings (610 KB Adobe PDF)
• Astro-Foil Residential Installation (2 MB Adobe PDF)
• Astro-Foil HVAC Applications (5.5 MB Adobe PDF)
• Astro-FoilCommon Q & A (110 KB Adobe PDF)
• Astro-Foil Technical Bulletin (280 KB Adobe PDF)
• Astro-Foil General Information (2 MB Adobe PDF)

1. ASTRO-FOIL works best when there is a 3/4' air space on each side of the insulation. (Larger air space is fine but a smaller one reduces its thermal effectiveness.)
    
2. ASTRO-FOIL should always be installed on the inside of the structure.
    
3. ASTRO-FOIL will not cure existing problems. Leaking roofs, rot or mold situations or other moisture or structural problems should be corrected before installation.
    
4. Any deteriorated wiring should be replaced prior to installing ASTRO-FOIL.
    
5. ASTRO-FOIL should be at least 3' from any heat producing fixtures, chimneys, blowers, etc. NEVER install ASTRO-FOIL directly above lighting or other heat producing devices.
    
6. Always turn off all electricity in the area when installing ASTRO-FOIL.

ASTRO-FOIL REFLECTIVE MATERIAL ASTRO-FOIL reflective installation consists of two layers of aluminum foil laminated to the outside of two layers of heavy-duty polyethylene air-bubble cushioning. These bubbles form trapped air spaces between the foil surfaces to give the structure excellent 'R' values. Because ASTRO-FOIL II is also impervious to moisture and air currents, it is an ideal convection and vapor barrier. ASTRO-FOIL's surfaces reflect heat in both directions to keep you warm in the Winter and cooler in Summer. Some of the many uses for ASTRO-FOIL
In Agricultural Buildings In Beverage Coolers In Commercial Buildings In Confinement Structures In Industrial Buildings In Warehouses In Workshops In Post Frame Construction Behind Freezers	Behind Woodstoves Behind Refrigeration Coils For Concrete-Curing Blankets Under Tents Under Sleeping Bags Under Mattresses As Padded Foot Warmers As Cargo Liners in Trucks As A Window Covering	As A Survival Blanket As Pharmaceutical Packaging As Duct Wrap On Overhead Doors
TECHNICAL DATA
Thickness: Weight: Flame Spread     (ASTM E-84-81A): Fire Rating: Linear Shrinkage: Puncture Resistance: R-Value*: Emittance C1371: Reflectance: Degradation: U-Value (Btu/ft. 2hro F): Water Transmission Rate     ASTME96: Fungi Resistant	Astro-Foil 5/16' Nominal (8mm) 1.25 oz. per sq. ft. (382 g/m2) 20 Flame/30 Smoke Class A/Class1 None 66 lbs. per sq. in. (455 kPa) 15 (down) 7.31 (Horiz.) 5.4 (Up) 0.03-0.04 0.96-0.97 0 0.0820 (down) 0.119 (Horiz.) 0.139 (Up) 0.02	Astro-E 3/16' Nominal (6.35mm) .811 oz. per sq. ft. (207 g/m2) 15 Flame/30 Smoke Class A/Class 1 None 63 lbs. per sq. in. (434 kPa) 14.5 (Down) 7.0 (Horiz.) 4.9 (Up) 0.03-0.04 0.96-0.97 0 0.0771 (down) 0.109 (Horiz.) 0.119 (Up) 0.02
HUD/FHA Projects: Meets HHI 1252B / California License: TF1213 / California Registry: CAT213 (NJ) / Canada CCMC 11978 * These values are obtained in a C236 hot box test and represent the R-Value of the cavity that includes the surround air spaces. The measurements were made in a cavity framed with standard 2Óx4Ó lumber. For complete details regarding methodology, contact your nearest innovative Energy Sales Office. ASTRO-FOILÕS ability to reflect heat in open applications is not fully measured by this test. ItÕs that extra reflective capability that makes it possible for ASTRO-FOIL to keep people and animals comfortable all year long.

Compliance Agency/Organization ASTRO-FOIL ASTRO-E 1995 CABO One and Two Family Dwelling Code Section 319.1 Section 319.1 California Bureau of Home Furnishings Insulation program (Reg.No.) CA-T338 CA-T338 City of Los Angeles RR-8403 RR-8403 Miami Dade County, Florida Building Code and Product Review Committee 98-0413.01 98-0413.01 Minnesota Dept. of Energy Yes Yes 1999 National Building Code Section 803.4 Section 803.4 1997 Standard Building Code Section 803.2 Section 803.2 1997 Uniform Building Code Section 707.3 Section 707.3   WARNING: Reflective bubble-pack insulation will ignite if exposed to fire or sufficient heat and intensity. Protect insulation from exposure to open flame or other ignition sources during shipping, storage and installation. The manufacturer believes this information and recommendations herein to be accurate and reliable. However, since use conditions are not within its control the manufacturer does not guarantee results from use of such products or other information herein and disclaims all liability from any resulting damage or loss. NO WARRANTY, EXPRESSED OR IMPLIED, IS GIVEN AS TO THE MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, OR OTHERWISE WITH RESPECT TO THE PRODUCTS REFERRED TO. Freedom from patents of PACTIV or others is not to be inferred. Astro-Foil is a registered trademark of Pactiv Corporation.

HEATING & AIR CONDITIONING DUCTS

Installation Guidelines:
1 - Wrap ducts with 12", 16" or 24" wide ASTRO-FOIL.
Tape edges and corners with ASTRO-FOIL tape to hold it securely in place and to create perfect vapor barrier.

2 - For extra efficiency band the duct with 2" wide strips of ASTRO-FOIL spaced 24" apart and hold in place with foil tape. The additional airspace between the duct and the ASTRO-FOIL will increase resistance to heat loss or gain.
Works great with round duct pipes, too! Where access allows you may choose to spiral-wrap the duct pipe.

More Efficient, Safer To Use and Easier To Install Than Regular Bulk Mineral Fiber Or Foamboard Insulation For Pre-Engineered Metal and Post-Frame Buildings

ASTRO-FOIL is a revolutionary type of industrial, commercial and general purpose insulation incorporating state-of-the-art technology in design and manufacture. It includes a building code approved vapor barrier, air infiltration barrier and powerful insulation all in one.

Its unique composite design consists of layers of polyethylene air bubble pockets, surrounded by a thin layer of reflective aluminum foil that is inorganic, water-resistant, puncture-resistant, termite and fungus resistant, non-allergenic and inhospitable to nesting rodents.

ASTRO-FOIL is easy to install—it’s thin, pliable, lightweight design is especially suited for pre-engineered and post-frame buildings. ASTRO-FOIL offers increased energy efficiency over traditional insulation products. And it’s safe... there are no protective masks, gloves or safety glasses required. Standard 4’and 6’ wide rolls can be easily trimmed with a utility knife or pair of scissors to fit any application. ASTRO-FOIL’s lightweight design makes it easy on your building’s design load.

ASTRO-FOIL Test Data:

• Puncture Resistance -ASTM F1306 (20 KB Adobe PDF)
• Determination of Emittance -ASTM E408 / C1371 (63 KB Adobe PDF)
• Burning Characteristics - ASTM E84 / NFPA255 / UBC42-1 (187 KB Adobe PDF)
• Fungus Resistance - ASTM MIL-STD810B (63 KB Adobe PDF)
• Thermal Performance - ASTM C236 (425 KB Adobe PDF)
• Water Vapor Transmission - ASTM E96 (90 KB Adobe PDF)
• Standards for Building applications - ASTM C1224 (1.2 MB Adobe PDF)
• Ignition Temperature - ASTM D1929 (120 KB Adobe PDF)
• Corrosivity - ASTM D3310 (115 KB Adobe PDF)
• Rate of Burning -ASTM D635 (120 KB Adobe PDF)

Information Source: Innovative Energy