|
Directory: Catalog >
Bock Water Heaters > Bock
Help Center
Tank Flushing Procedure for Bock Water Heater
- Shut off electrical power to the water heater and disconnect the cold water
supply.
- Completely drain the water heater tank and remove the drain valve.
- Install a 3/4" x 6" nipple with a garden hose adapter into the drain
valve spud (opening) and run it to the floor drain, a bucket, or another method
of removing water from the work area.
- Use a straight adjustable spray nozzle (set for wide angle) attached to a
garden hose. Insert the nozzle into the cold water inlet spud and wash down the
interior sides of the tank. This will remove any particles that have adhered to
the sides of the tank. Slowly begin to lower the nozzle into the tank until it
reaches the bottom. Repeat this process several times to be sure the interior
walls are clean.
- Close the drain valve, refill the water heater, and return it to service.
Information Source: Bock Water Heaters
[Home] [Catalog]
[Contact Us] [Parts] [Review
Shopping Cart ] [About Us / Terms of Sale]
[Boilers] [Radiant
Heating] [Water Heaters] [Plumbing]
[Pumps] [Indoor Air
Quality] [Insulation]
Purchase products securely with:
Manufacturers may change product specifications and information without notice.
Copyright 2008, JupiterHeating.com
& Jupiter Sales, LLC. All rights reserved.
|
