WarmRite Manifold Station - Flush Mount Cabinet

This panel is designed as a basic manifold station. The panel is operated as a single zone system by using a thermostat to activate the external (not included in the panel) zone valve or a circulator. The panel can also be used as a multiple zone system. The on/off valves located on the return manifold can be fitted with optional electrical valve actuators to control individual loops in the system. In this application, every actuator is connected to a thermostat located in the area served by the loop(s) when the thermostat calls for heat, the actuator(s) opens the loop(s) allowing flow. When all loops are satisfied the circulator is shut down.

Note: Ensure that the thermostat is capable of handling the amperage draw from the actuators (check manufacturers specifications).

Balancing valves located on the supply manifold with flow indicators on the return manifold allow the user to adjust and visually monitor the flow rates of each loop. The unit has no integral zone control device. When a zone valve or circulator is attached to the manifold station a Circulator Control Module has to be fitted in the system. This controls the zone valve or circulator and the loop valve actuators for the zones. The circulator control module contains a 24V transformer, a circulator relay, a dry contact enable and an adjustable high/low limit which prevents the supply fluid from exceeding the desire temperature. Valves on the supply manifolds allow each loop to be isolated when necessary. The optional actuators and thermostats must be ordered separately according to the project specifications.

Can supply 3/8", 1/2" or 5/8" XPA or 3/8", 1/2", 3/4" PEX piping.

Features:

• 4, 8 and 11 loop control panels allowing 3-11 loop systems
• Supply manifold with balancing valves
• Return manifold with manual shut off valves and flow control indicators
• Pressure and temperature gauge
• Fill / drain valves
• Automatic air vent
• Isolating valves
• Flush Mount Steel Cabinet (fits 2 x 4 wall)
• Fittings must be ordered separately from a choice of 3/8", 1/2", 5/8", 3/4" XPA or PEX. Thermostat is not included.
• Kitec General Help
• Kitec shipping / availability guidelines

Note: Quantities can be modified after you "Add to Cart". The shopping cart will also give you a running total of the shipping charges.