WarmRite Multi-Use Mixing Control Panel

This panel is designed to operate snowmelt or commercial and residential heating systems, and provide optional mixing. Mixing can be modulating (488221) or floating (488220) with the addition of an optional actuator and controller. The systems are usually designed with pipe loops of equal length. However, optional flow meters can also be added to allow for proper balancing of various loop lengths as required.

In most circumstances individual loop flow rate adjustment is not required, nor is recirculation necessary. An external control turns the circulator on when heat is required.

Valves on the supply and return manifolds are used if flow rate compensation is required. The addition of optional power heads on the return manifold can also provide for zoning. They may also be used to isolate each loop for installation and servicing ease. A circulator control module contains a 24V transformer, a circulator relay, a dry contact enable, and an adjustable high limit which prevents the supply fluid from exceeding the desired temperature.

The panel operation is controlled by closure of a 24V dry contact or 0-10VDC input. An example of devices that can provide these are: two and three wire room thermostats, programmable thermostats, set point controls, indoor/outdoor reset controls, snowmelt controls, integrated building controls, etc.

Features:

• 5, 8, 11 and 14 loop control panels allowing 3-14 loop systems
• Supply manifold with on/off balancing valves
• Return manifold with manual shut off valves and flow control indicators
• Circulator control module (includes 24V transformer, circulator relay, dry contact enable, high limit) and execisor
• Circulator
• Pressure and temperature gauges
• Fill / drain valves
• 3-way mixing valve
• Automatic air vent
• Isolating valves
• Steel Cabinet
• Fittings must be ordered separately from a choice of 3/8", 1/2", 5/8", 3/4" XPA or PEX. Thermostat is not included.
• Kitec General Help
• Kitec shipping / availability guidelines

Note: Quantities can be modified after you "Add to Cart". The shopping cart will also give you a running total of the shipping charges.