WarmRite Multi-Zone Manifold Station with Circulator

This panel is used as a multiple zone system. There is no supply water temperature control in the panel. The on/off valves located on the supply manifold are fitted with electrical valve actuators to control individual loops in the system. Every actuator must be connected to a thermostat located in the area served by the loop(s). When the thermostat calls for heat, the actuator opens allowing flow. When all loops are satisfied the dry contact in the circulator control module opens and the circulator shuts down.

Balancing valves with flow indicators on the supply manifold with flow indicators allow the user to adjust and visually monitor the flow rates of each loop. A circulator control module contains a 24V transformer, a circulator relay, a dry contact enable, and an adjustable high limit/low limit which prevents the supply fluid from exceeding the desired temperature. Valves on the supply and return manifolds allow each loop to be isolated when necessary. The thermostats must be ordered separately according to the project specifications.

Each actuator's operation is controlled by closure of a 24V dry contact. An example of devices that can provide this are: two and three wire room thermostats, programmable thermostats, set point controls, integrated building controls, etc.

Note: Ensure that the thermostat is capable of handling the amperage draw from the actuators (check manufacturers specifications).

Features:

• 3-11 loop systems
• Supply manifold with balancing valves
• Return manifold with manual shut off valves and flow rate indicators
• Circulator control module (includes 24V transformer, circulator relay, dry contact enable, and high limit) and excesisor
• Circulator
• Actuator modules
• Electrical valve actuators (one per loop)
• Pressure and temperature gauge
• Fill / drain valves
• Isolating valves
• Pressure balancing bypass valve
• Automatic air vent
• Steel Cabinet
• Fittings must be ordered separately from a choice of 3/8", 1/2", 5/8", 3/4" XPA or PEX. Thermostat is not included.
• Kitec General Help
• Kitec shipping / availability guidelines

Note: Quantities can be modified after you "Add to Cart". The shopping cart will also give you a running total of the shipping charges.