WarmRite Recirculating Zone Control Panel

This panel is designed as a manifold station that provides constant circulation in the distribution system. There is no supply water temperature control in the panel.

The panel operates primarily as a single zone system maintaining the average space temperature. A thermostat and a diverting valve control the heat input. It cycles the heat source to the panel and through the floor piping. When the zone is satisfied, the diverting valve closes the path to the heat source and removes the external enable signal. The fluid continuously circulates in the floor piping, providing even heat distribution both on heat up and cool down cycles.

The panel operation is controlled by closure of a 24V dry contact. An example of devices that can provide this are: two and three wire room thermostats, programmable thermostats, set point controls, indoor/outdoor reset controls, integrated building controls, etc.

Features:

• 5, 8 and 11 loop control panels allowing 3-11 loop systems
• Supply manifold with balancing valves
• Return manifold with manual shuf off valves and flow rate indicators
• Circulator control module (includes 24V transformer, circulator relay, dry contact enable, and high limit)
• Circulator
• Diverting valve
• Pressure and temperature gauges
• Fill / drain valves
• Isolating valves
• Automatic air vent
• Steel Cabinet
• Optional expansion tank
• Fittings must be ordered separately from a choice of 3/8", 1/2", 5/8", 3/4" XPA or PEX. Thermostat is not included.
• Kitec General Help
• Kitec shipping / availability guidelines

Note: Quantities can be modified after you "Add to Cart". The shopping cart will also give you a running total of the shipping charges.