Kitec / WarmRite Commercial Mixing Bypass Control Panel
This panel is designed to provide constant circulation at both sides of the system. Primary supply heat/cool and secondary side heat/cool. A mixing valve is provided to maintain accurate temperature for both cooling and heating applications where lower delta T's are required. The panel is capable of high flow rates per loop to accommodate the delta T's in the design of heat/cool systems.

Kitec / WarmRite Control Panel with Heat Exchanger
This panel is designed to separate the secondary system fluid from the primary system fluid by utilizing a plate heat exchanger, and is recommended for applications that use an open loop system as the heat source or in applications where a water/glycol mixture is used in the secondary heating loop.

Kitec / WarmRite Floor Warming Control Panel (Bottom Entry)
This WarmRite Floor Warming Control Panel is designed to operate floor warming and basic heating systems. This panel incorporates non-ferrous components to allow use with the domestic water supply where permitted. A built-in tempering valve allows control of supply water temperature.

Kitec / WarmRite Floor Warming Control Panel (Top Entry)
This WarmRite Floor Warming Control Panel is designed to operate floor warming and basic heating systems. This panel incorporates non-ferrous components to allow use with the domestic water supply where permitted. A built-in tempering valve allows control of supply water temperature.

Kitec / WarmRite Injection Mixing Control Panel
The WarmRite Injection Mixing Control Panel is designed to control supply water temperature by injection mixing. The WarmRite Control provides variable speed operation of an injection circulator based on outdoor air temperature. This panel is ideal when supply temperature control is required. The application of this panel is extended to control the return water temperature for conventional boilers by installing the return water temperature sensor.

Kitec / WarmRite Manifold Station (Flush Mount)
This panel is designed as a basic manifold station. The panel is operated as a single zone system by using a thermostat to activate the external (not included in the panel) zone valve or a circulator. The panel can also be used as a multiple zone system. The on/off valves located on the return manifold can be fitted with optional electrical valve actuators to control individual loops in the system.

Kitec / WarmRite Multi-Use Mixing Control Panel
This panel is designed to operate snowmelt or commercial and residential heating systems, and provide optional mixing. Mixing can be modulating (488221) or floating (488220) with the addition of an optional actuator and controller. The systems are usually designed with pipe loops of equal length. However, optional flow meters can also be added to allow for proper balancing of various loop lengths as required.

Kitec / WarmRite Multi Zone Manifold Station
This panel is used as a multiple zone system. There is no supply water temperature control in the panel. The on/off valves located on the supply manifold are fitted with electrical valve actuators to control individual loops in the system. Every actuator must be connected to a thermostat located in the area served by the loop(s). When the thermostat calls for heat, the actuator opens allowing flow. When all loops are satisfied the dry contact in the circulator control module opens.

Kitec / WarmRite Multi Zone Manifold Station with Circulator
This panel is used as a multiple zone system. There is no supply water temperature control in the panel. The on/off valves located on the supply manifold are fitted with electrical valve actuators to control individual loops in the system. Every actuator must be connected to a thermostat located in the area served by the loop(s). When the thermostat calls for heat, the actuator opens allowing flow. When all loops are satisfied the dry contact in the circulator control module opens and the circulator shuts down.

Kitec / WarmRite Recirculating Zone Control Panel
This panel is designed as a manifold station that provides constant circulation in the distribution system. There is no supply water temperature control in the panel.

Kitec / WarmRite Snowmelt / Manifold Station Circulator
This panel is designed as a basic manifold station, there is no supply water temperature control in the panel.