|
|
Directory: Catalog > Water
Heaters > Bock Water Heaters
Bock
Oil-Fired Large Capacity (Heavy Commercial & Industrial) Water Heaters
Over the years, Bock Water Heaters has earned a bit of a reputation . . . by
providing quality in construction, efficiency in performance and durability in
operation — Bock is recognized as the leader in oil-fired water heaters.
UL-listed burners with flame-retention heads. High-speed motors, two-stage
fuel pumps. Delayed oil valve. 10,000 volt constant duty ignition transformers.
Cadmium sulfide flame detectors and primary flame-safety relays. Heavy-duty steel
air tubes. Stainless steel ignition points with porcelain insulators. Mounting
flanges. 115V, 60H, single phase (other voltages available).
- Turboflue®
- Bock's patented design is the industry's most advanced and efficient heat exchanger.
Simply put, it heats water faster and uses less fuel, which reduces energy costs.
- C-Glass®- Durable and exclusive porcelain enamel glass is used to line all
tanks and Turboflues. Highly resistant to aggressive water. Fresh silica mixed
daily to provide the highest quality.
- Built to last - Hand-crafted from heavy gauge steel. Longer life equals a
higher "Return on Investment".
- Multiple magnesium anode rods - Inhibit corrosion and maximize tank life.
Electrolysis attacks the anode rods, not the welded seams of the tank.
- Double pressure tested - Only Bock pressure tests its tanks twice.
- Fully welded tank skirt - prevents noxious flue gases from escaping between
the tank and jacket.
- Insulation fiberglass (non CFC foam optional) - decreases standby heat loss.
- Accurate temperature control - Only Bock offers dual aquastats or operating
and high limits, as standard.
- Spring loaded inspection door - Easy access for inspection and maintenance,
also functions as a pressure relief valve.
- Brass drain valve - Accessible, tamper-proof.
- Factory installed T&P valve - CSA listed.
- Multiple large hand holes for easy inspection and maintenance.
- UL listed.
- ASME construction available..
- Integrated 2" steel skid - for safe and easy transfer.
- Wet leg design - surrounds the combustion chamber with water to capture heat
from the refractory.
- Externally mounted burner - provides easy installation and maintenance.
- 3 year limited warranty - on steel tank.
- For your safety (and to comply with the warranty), have all water heater installations
and Repairs completed by a licensed and insured contractor. All Bock Water Heaters
require field
setup and adjustment using combustion testing equipment per NFPA Standards.
- Residential delivery may not be available for this unit - shipment may be
made to your contractor, a commercial location, or to Will Call at the nearest
freight terminal. Contact us for more information.
- Warning: Do not install on combustible flooring. Install
in accordance with all local codes and ordinances and with the American Standards
Association recommendations.
- Download Literature: Loading times will vary depending on the speed of your Internet connection.
After the download is complete, use your browser's back arrow to return to this
page.
Contact Us for Pricing.
|
Bock
Large Capacity Oil Water Heater - 150 Series (ASME Certification)
|
Bock 150E-400 Water Heater
176 Gallon
400,000 BTU
Recovery: 447 GPH @ 90°F Rise
Minutes to Recovery: 24
Firing Rate: 2.8 gph
Shipping Wgt. 2,108 lb 56703
|
Bock 150E-600 Water Heater
168 Gallon
600,000 BTU
Recovery: 671 GPH @ 90°F Rise
Minutes to Recovery: 15
Firing Rate: 4.3 gph
Shipping Wgt. 2,208 lb 56735
|
Bock 150E-800 Water Heater
160 Gallon
800,000 BTU
Recovery: 894 GPH @ 90°F Rise
Minutes to Recovery: 11
Firing Rate: 5.7 gph
Shipping Wgt. 2,308 lb 56767
|
| Bock Large
Capacity Oil Water Heater - 200 Series (ASME Certification)
|
Bock 200E-450 Water Heater
221 Gallon
450,000 BTU
Recovery: 503 GPH @ 90°F Rise
Minutes to Recovery: 26
Firing Rate: 3.7 gph
Shipping Wgt. 2,700 lb 56657 |
Bock 200E-650 Water Heater
212 Gallon
650,000 BTU
Recovery: 727 GPH @ 90°F Rise
Minutes to Recovery: 18
Firing Rate: 4.7 gph
Shipping Wgt. 2,700 lb 56637
|
Bock 200E-850 Water Heater
204 Gallon
850,000 BTU
Recovery: 950 GPH @ 90°F Rise
Minutes to Recovery: 13
Firing Rate: 6.1 gph
Shipping Wgt. 2,700 lb 56671
|
Bock 200E-1150 Water Heater
192 Gallon
1,150,000 BTU
Recovery: 1,286 GPH @ 90°F Rise
Minutes to Recovery: 9
Firing Rate: 8.3 gph
Shipping Wgt. 2,700 lb 56597
|
| Bock Large
Capacity Oil Water Heater - 250 Series (ASME Certification)
|
Bock 250E-800 Water Heater
273 Gallon
800,000 BTU
Recovery: 898 GPH @ 90°F Rise
Minutes to Recovery: 18
Firing Rate: 5.8 gph
Shipping Wgt. 3,516 lb 56577
|
Bock 250E-1000 Water Heater
260 Gallon
1,000,000 BTU
Recovery: 1,130 GPH @ 90°F Rise
Minutes to Recovery: 14
Firing Rate: 7.3 gph
Shipping Wgt. 3,606 lb 56557
|
Bock 250E-1250 Water Heater
251 Gallon
1,250,000 BTU
Recovery: 1,393 GPH @ 90°F Rise
Minutes to Recovery: 11
Firing Rate: 9.0 gph
Shipping Wgt. 3,666 lb 56537
|
Bock 250E-1500 Water Heater
242 Gallon
1,500,000 BTU
Recovery: 1,703 GPH @ 90°F Rise
Minutes to Recovery: 9
Firing Rate: 11.0 gphs
Shipping Wgt. 3,726 lb 56517 |
IMPORTANT: By purchasing this water heater from JupiterHeating.com, the customer is agreeing that the unit will be installed by a licensed, professional heating contractor; that the customer and installer will follow all local zoning regulations, as well as all manufacturer's installation instructions, policies, and warranty requirements; and that the customer has read and understood JupiterHeating.com's Terms of Sale.
Shipping for unit is $200 to anywhere in the continental United States (multiple units are shipped at no additional charge).
The rate is based on residential delivery with a liftgate. This unit is
strapped onto a pallet and shipped via LTL to minimize risk of shipping damage.
Shipping savings may by possible for commercial delivery,
or for not needing a liftgate. Contact Us for a custom
shipping quote if any of those situations apply, or if you are located outside the continental United States.

Information Source: Bock Water Heaters

|