| Part # |
Description |
| 7000P-805 (new # 64980021) |
Plastic Tubing 3/16 in. ID X 5/16 in. OD X 12 in. |
| 7250P-005 |
Gasket - Probe / Electrode |
| 7250P-069 |
M4 X 8MM Cheese Head Phillips Screws - Probe / Electrode |
| 7250P-150 (new # 64980007) |
Blocked Vent Pressure Switch |
| 7250P-152 |
Silicone O-Ring 2-007 - Barbed Fitting |
| 7250P-154 (new # 64980137) |
S.S. Barbed Fitting - 1/4 in. Hose X 10-32 |
| 7250P-162 |
Ceramic Refractory (Located Inside End of Module) |
| 7250P-378 |
Fuse - Control Board - 6.3 AMPS |
| 7250P-499 |
Temp/Pressure Gauge 200 PSI |
| 7250P-580 |
Relay Board |
| 7250P-667 |
Thermistor |
| 7250P-673 |
Leveling Foot /Mount Kit (Single Models Only) |
| 7250P-739 |
Flue ECO Switch - 160 Deg. |
| 7350P-004 |
Inlet Nipple |
| 7350P-007 |
850,000 BTU Modcon Module |
| 7350P-012 |
Blower Wiring Harness (Location) |
| 7350P-015 |
Inlet/Outlet Nipple Cup |
| 7350P-023 |
Flame Rectification Probe (with Gasket) |
| 7350P-034 |
Gas Valve (Includes O-Ring, Screws) |
| 7350P-034-1 |
Swirl Plate with Studs, Washers |
| 7350P-034-2 |
Blower Adapter Flange (Includes O-Ring, Screws) |
| 7350P-034-3 |
Maximum Flow Restrictor Flange |
| 7350P-034-4 |
12MM Gas Injector |
| 7350P-034-5* |
1 in. NPT Flange |
| 7350P-034-6 |
Air Adjustment Ports |
| 7350P-034-8* |
Hirschman Connector |
| 7350P-035 |
High Pressure Gas Switch with O-Ring (Optional) |
| 7350P-036 |
Low Pressure Gas Switch with O-Ring (Optional) |
| 7350P-042* |
Electrical Box |
| 7350P-048 |
Jacket - Lower Front (with Screws) |
| 7350P-052 |
Jacket - Top (with Screws) |
| 7350P-057 |
Jacket - Left Side (with Screws) |
| 7350P-058 |
Jacket - Right Side (with Screws) |
| 7350P-061 |
Jacket - Bottom (with Screws) |
| 7350P-062 |
Electrical Box/Access Panel Cover |
| 7350P-063 |
# 10 X 1/2 in. Self Tapping Screw |
| 7350P-064 |
Gasket - Blower to Flapper Valve |
| 7350P-069* |
Jacket Mounting Bracket |
| 7350P-070 |
Field Connection Board |
| 7350P-072 |
O-Ring - Inlet /Outlet Nipple |
| 7350P-082* |
Gas Pipe Assy w/Shut-Off - 1-1/4 in. IPS X 1 IPS |
| 7350P-087* |
Jacket - Front |
| 7350P-089 |
Low Water Cut-Off Probe |
| 7350P-093 |
M8 X 20MM Hex Head Bolt - Blower |
| 7350P-095* |
1 in. NPT 90 Degree Elbow |
| 7350P-096* |
1 in. M X 1 in. F Street Elbow - Zinc Phosphate Coated |
| 7350P-098* |
1 in. NPT X 3 in. Nipple - Zinc Phosphate Coated |
| 7350P-099* |
1 in. Gas Ball Valve |
| 7350P-104 |
Air Inlet Bracket |
| 7350P-109* |
1-1/4 in. - 2 in. Reducing Coupling |
| 7350P-113 |
2 in. PVC Plug |
| 7350P-126 |
Jacket - Rear (with Screws) |
| 7350P-129 |
Fuse - Connection Board - 3.15 AMPS |
| 7350P-146* |
Jacket - Upper Front (Includes Panel Display) |
| 7350P-167 |
Condensate Overflow Switch |
| 7350P-223 |
75# Relief Valve - 3/4 in. NPT |
| 7350P-238 |
Combustion Blower |
| 7350P-266 |
Spark Electrode (with Gasket) |
| 7350P-277* |
Shut-Off Drain |
| 7350P-318* |
Outlet Nipple (with O-Ring) |
| 7350P-346* |
Modcon Frame |
| 7350P-420 |
Vent Adapter |
| 7350P-443 |
Burner Assembly (Burner Door, Flapper Valve, Burner, Burner Gasket) |
| 7350P-460 |
Burner Door Gasket |
| 7350P-465* |
Rope Gasket |
| 7350P-613 |
Condensate Collector |
| 7350P-626 |
Thermal Fuse |
| 7350P-633 |
120V Wiring Harness (Location) |
| 7350P-738 (new # 7350P-736) |
Low Voltage Wiring Harness (Location) |
| 7350P-748 |
Jacket - Upper Front (Includes Panel Display and Switch) |
| 7350P-800 |
Harness Voltage Divider |
| 7450P-028 |
Display Board |
| 7450P-085 |
Temperature Limit Switch |
| 7450P-122 |
926 Control Board |
| 7500P-002 |
ECO Switch - 190 Deg. |
| 7500P-033 |
ECO High Limit Sensor (with O-Ring) |
| 7500P-067 |
M6 Nut - Burner Door |
| 7500P-087 |
Power Switch |
| 7500P-100 |
O-Ring - ECO High Limit Sensor |
| 7500P-115 |
Screw - Pan Head 6-32 X 1/4 in. |
| SN1018* |
3/4 in. NPT X 3 in. Nipple - Brass |
