JupiterHeating.com

Directory: Catalog > Boilers & Water Heaters > Heat Transfer Products (HTP) > Parts

Parts for the Munchkin T50M Boiler, Revision 2

 

Part # Description
7000P-805 Plastic Tubing 3/16 in. ID (Blocked Vent Pressure Switch)
7250P-003 Gasket (Aluminum Elbow to Air Channel)
7250P-005 Gasket (Flame Rectification Probe / Spark Electrode)
7250P-019 ECO High Limit Sensor
7250P-049 Flame Rectification Probe (with Gasket)
7250P-059 Thermistor
7250P-069 Screw M4 X 8MM (Flame Rectification Probe / Spark Electrode)
7250P-070 Gasket (Burner)
7250P-080 Relief Valve
7250P-081 Water Pressure Switch (red dot, most common)
7250P-085 Combustion Blower (Blower Motor)
7250P-089 Thermodisc Flue 210 Degrees
7250P-091

LED Display Box with Ribbon Cable

  • Only if the main control board is 926.
7250P-096 Water Pressure Switch (blue dot, less common)
7250P-144 Gasket (Aluminum Elbow to Combustion Blower)
7250P-145 Air Inlet Baffle
7250P-150 (new # 64980007) Blocked Vent Pressure Switch
7250P-151 Steel Push Retainer (Thermodisc Flue ECO)
7250P-152 O-Ring 007 (Blocked Vent Pressure Switch)
7250P-153 S.S. Hex Nut 10-32 (Blocked Vent Pressure Switch)
7250P-154 (new # 64980137) Hose Barb 1/4 X 10-32 (Blocked Vent Pressure Switch)
7250P-160 Ceramic Target Wall
7250P-161 Burner Door Refractory
7250P-169 Burner Door
7250P-170 Gasket (Burner Door to Air Channel)
7250P-178 Air Channel
7250P-204 Screw (Burner)
7250P-206 Screws Torx M5 x 22MM (Air Channel to Burner Door) - Bag of 5)
7250P-215 Hose Clamp (Condensate Assembly)
7250P-216 Burner (with Gasket)
7250P-226 Blower Motor Gasket
7250P-311 PVC Black Tubing 1/8 ID (thermodisc Flue ECO)
7250P-332

LED Display Box with Ribbon Cable - DISCONTINUED

  • Only if the main control board is 925.
7250P-352 Control Board Hold Down Clips
7250P-378 Fuse (Control Board)
7250P-394* Top Flue Exhaust
7250P-421 Spark Electrode (with Gasket)
7250P-427 Gasket (Top Flue Exhaust Pipe)
7250P-444 Exhaust Manifold Tube
7250P-448 Dungs Gas Valve
7250P-460 Condensate Hose Assembly
7250P-644 (new # 64980046) Gas Valve Adapter Plate (with Screws)
7250P-646 PVC Tee Sch. 40 3/4 in. (Condensate Assembly)
7250P-647 Poly Plug 3.4 in. NPT (Condensate Assembly)
7250P-648 PVC Nipple Sch. 80 3.4 in. NPT (Condensate Assembly)
7250P-649 Cable Clamp (Condensate Assembly)
7250P-653 Spark Cable
7250P-696 5 Pin Wiring Harness
7250P-697 9 Pin Wiring Harness
7250P-700 Low Voltage Wiring Harness (10 Pin/20 Pin Main Wiring Harness, with Gas Valve Plug)
7250P-704 Screw M4 X 8MM (Ceramic Target Wall)
7250P-731
(also use 7250P-1028)

926 Control Board Upgrade Kit

  • For units built before July, 2008 that have the 925 Control Board
  • Includes 926 Control Board (with Fuse) 7350P-008, Display Card and Ribbon Cable 64980136 (old # 7350P-009), Spark Cable 7250P-653, Hold Down Clips 7250P-352, and Flue Jumper Wire (if needed).

 

7350P-008
(also use 7250P-1208)
926 Control Board (with Fuse)
- For units built after July, 2008, or if the board has been previously upgraded from 925 to 926
7350P-009 (new # 64980136)

Display Card and Ribbon Cable (without box)

  • Only if the main control board is 926.
7350P-624 24VAC Gas Valve Coil Only - Grey (discontinued, please order the complete gas valve assembly)
7450P-218 Condensate Neutralizer (formerly part # N1100)
7500P-067 Nut M6 (Burner Door)
7500P-091 Swirl Plate
7500P-094 O-Ring (Gas Valve Piping Assembly)
7500P-099 Screw M4 x 12MM (Gas Valve Piping Assembly
7500P-109 Washer M4 (Ceramic Target Wall)
   
  See Accessories - PC connection, vent kits, mesh screens, etc.
.  

 

Getting an error code on your display? Here are common Munchkin Error Codes and their Remedies.